Puff htv Leopard 3

+ PUFF HEAT TRANSFER VINYL + 18" X 12" SHEET +

Puff HTV provides a new dimension and 3D look. It expands under the heat press and turns your garments from a flat look to a “puffed” up dimensional look great for shirts, jackets, hats, and more! Puff htv works very similar to regular adhesive vinyl. Cut the vinyl ‘pretty side up’ and do NOT mirror your design. Weed vinyl and apply the transfer mask (htv transfer mask is reusable around 5 times, so save it!). Burnish well, remove backing, and transfer to your shirt/substrate. Then press with a Teflon sheet at 300° for 8-12 seconds. Hot peel.

+ PUFF HEAT TRANSFER VINYL +

- 18" X 12" SHEET
- Requires Transfer Mask Sheet (Choose From Dropdown If Needed)
- Cut Pattern Side Up (NO need to mirror image)
- Weed And Apply Transfer Mask
- Remove Backing
- PrePress Garment To Remove ALL Moisture
- Heat Press Required
- Apply 300°F/149°C | Heavy Pressure | 8 - 12 Seconds | Hot Peel
- Suitable for 100% Cotton | Cotton/Poly Blends | 100% Polyester
- Light OR Dark Color Shirts
- 24 Hours Before 1st Wash | Machine wash cold | Mild detergent
- Dry on low dryer setting | Or hang dry | Do not dry clean or bleach


I ensure all prints are the highest possible quality, free of pixelation and distortion. This print is exclusive to North Eighty. Actual printed vinyl colors may vary from what is displayed on your computer due to monitor display settings and materials printed. Heat press and teflon sheet recommended for htv. Always test cut vinyl and application process. Adhesive and heat transfer vinyl is not reusable.

Copyright © North Eighty